AUTOPLEX 100/3

Lithium grease

Meets specifications

ISO 6743/9, DIN 51825, DIN 51502, NLGI 1, 2, 3

Technical characteristics

Working penetration, mm/10
220-250
Dropping point, °C, min.
195
NLGI classification
3
ISO classification
L-XCCHB 3
DIN classification
KP3K-30

These motor vehicle lubricant greases belong to the lithium lubricating greases group, specially formulated for lubrication of motor vehicle and agricultural machinery tribomechanical parts. They can also be applied in industry, for lubrication of machine assemblies exposed to severe operating conditions, such as shock loads, vibrations, etc. Such lubricant greases have good water resistance and adhesivity to metal surfaces, thus protecting them from corrosion. Improved lubricating film quality, composition consistency and good anticorrosive properties guarantee extended lubrication efficiency without the need for replacement. Applicable within the temperature range from -30°C to 130°C.

Autoplex 100/3 is particularly recommended for lubrication of wheel hubs in all motor vehicle types, with replacement interval after 100 000 km. It can also be used in industry, for lubricating of machine assemblies exposed to harsh operating conditions, such as shock loads, vibrations etc.

The bearing capacity of the lubricating layer is increased by the addition of a friction modifier, molybdenum disulfide, with the addition of an additive to withstand increased loads. Molybdenum disulfide offers special advantages under certain lubrication conditions, especially where the grease is expelled from the contact surface by sliding or vibrating. In cases where lubrication is performed infrequently, molybdenum disulfide allows for extended lubrication times.

Technical data sheet available on request

Available in packs

180kg
18kg