KALCIMA KS 2

Lubricating grease

Meets specifications

ISO 6743/9

DIN 51825

DIN 51502

NLGI 2,3

Technical characteristics

Working penetration, mm/10

265-295

Dropping point, °C, min.

NLGI classification

ISO classification

L-XBBHA 2

DIN classification

K2C-30

Description

Technical data sheet available on request

Lubricating greases Kalcima KS 2 and Kalcima KS 3 are calcium-based greases, manufactured from calcium soap, as thickener, and specially selected base oils. Lubricating greases Kalcima G KS 2 and Kalcima G KS 3 contain colloidal graphite. Good water resistance allows their use in ambient-influence exposed components.

Kalcima KS 2, KS 3 are recommended for lubrication of slideways, trunkings, joints, and any sliding components operating at low load, within the operating temperature range from -30°C to 70°C.

Technical data sheet available on request

Available in packs

180kg

18kg

Related products

Products for industrial use

TRAFOMOL SPECIJAL

Trafomol Special is an inhibited transformer oil with high dielectric strength, appropriate specific heat capacity and thermal conductivity. It is manufactured from specially refined high-purity base oil and oxidation inhibitor. This type of oil is used for isolation and cooling of various electrical drive equipment, such as transformers, switches, oil cables, etc.

TRAFOMOL

Trafomol is a uninhibited insulating oil for transformers, manufactured from specially refined high-purity base oil. It has high dielectric strength, as well as an appropriate specific heat capacity and thermal conductivity. This type of oil is used for isolating and cooling of various electrical drive equipment, such as transformers, switches, dampers, oil cables, etc.

TRANSTERM 2000

TRANSTERM 2000 is a heat tansfer oil, manufactured from paraffin-based narrow hydrocracked base oil cuts. It is recommended as a heat transfer agent in closed heating systems, operating at a temperature range from -100C to 3200C. This type of oil has a very strong thermal stability, high specific heat capacity and thermal conductivity, as well […]

ULJE ZA OPLATE UP-15

Formwork release oil is a high-quality oil, containing adhesion-improving additives. It is used as a coating agent for steel, wood and similar formwork (moulds) in concrete manufacturing. Formwork release oil ensures easy detaching of concrete from the formwork, thus leaving the concrete surface smooth.

ULJE ZA KALUPE ISO VG: 200

Mould oil is manufactured from solvent base oil and adhesion-improving additives. It is used as a mould lubricant in gas concrete (aerated concrete) and similar product manufacturing. This type of oil has very strong adhesibility properties, thus allowing easy detaching of gas concrete (aerated concrete) from the mould.

About us

Contact

Quality

Approvals

Laboratory

Ecological projects

Products

Special groups

Services

Frequently Asked Questions

Technical sheets