ULJA ZA KLIZNE STAZE KS ISO VG: 46

Mineral oil for slides

Meets specifications

ISO 6743/4 HG (ISO VG 32, ISO VG 46, ISO VG 68)

ISO 11158 HG (ISO VG 32, ISO VG 68)

MAG CINCINNATI-MACHINE P-53 (ISO VG 32)

P-47 (ISO VG 68)

P-50 (ISO VG 220)

ISO 6743/13 L-G (ISO VG 100, ISO VG 150, ISO VG 220, ISO VG 320)

ISO 19378 G-A (ISO VG 100, ISO VG 150, ISO VG 220, ISO VG 320)

Technical characteristics

Viscosity at 40°C, mm2/s

41.4-50.6

Viscosity index, min.

120

Flash point, min.,°C

230

Pour point, max., °C

-9

Description

Technical data sheet available on request

Ulje za klizne staze are high-quality oils used for slideway and tool lubricating. Lower slideway oil viscosity grades are designed for lubrication of slideways and hydraulics in combined industrial systems. Higher slideway oil viscosity grades are designed for lubrication of slideways operating under medium and high-loads. Slideway oils provide excellent protection against corrosion, they have good anti-wear properties and good adhesibility.

Technical data sheet available on request

Available in packs

10L

200L

Related products

Products for industrial use

TRAFOMOL SPECIJAL

Trafomol Special is an inhibited transformer oil with high dielectric strength, appropriate specific heat capacity and thermal conductivity. It is manufactured from specially refined high-purity base oil and oxidation inhibitor. This type of oil is used for isolation and cooling of various electrical drive equipment, such as transformers, switches, oil cables, etc.

TRAFOMOL

Trafomol is a uninhibited insulating oil for transformers, manufactured from specially refined high-purity base oil. It has high dielectric strength, as well as an appropriate specific heat capacity and thermal conductivity. This type of oil is used for isolating and cooling of various electrical drive equipment, such as transformers, switches, dampers, oil cables, etc.

TRANSTERM 2000

TRANSTERM 2000 is a heat tansfer oil, manufactured from paraffin-based narrow hydrocracked base oil cuts. It is recommended as a heat transfer agent in closed heating systems, operating at a temperature range from -100C to 3200C. This type of oil has a very strong thermal stability, high specific heat capacity and thermal conductivity, as well […]

ULJE ZA OPLATE UP-15

Formwork release oil is a high-quality oil, containing adhesion-improving additives. It is used as a coating agent for steel, wood and similar formwork (moulds) in concrete manufacturing. Formwork release oil ensures easy detaching of concrete from the formwork, thus leaving the concrete surface smooth.

ULJE ZA KALUPE ISO VG: 200

Mould oil is manufactured from solvent base oil and adhesion-improving additives. It is used as a mould lubricant in gas concrete (aerated concrete) and similar product manufacturing. This type of oil has very strong adhesibility properties, thus allowing easy detaching of gas concrete (aerated concrete) from the mould.

About us

Contact

Quality

Approvals

Laboratory

Ecological projects

Products

Special groups

Services

Frequently Asked Questions

Technical sheets

Products

Contact