Eng
  • Srpski jezik
  • Српски
  • Русский
    • Products for industrial use / Other products

    TRANSTERM 2000

    Mineral oil

    Meets specifications

    ISO 6743-12 (L-QC)
    DIN 51522

    Technical characteristics

    Viscosity at 40°C, mm2/s
    28.8-35.2
    Flash point, min., °C
    240
    Pour point, max., °C
    -8

    Description

    Technical data sheet available on request

    TRANSTERM 2000 is a heat tansfer oil, manufactured from paraffin-based narrow hydrocracked base oil cuts. It is recommended as a heat transfer agent in closed heating systems, operating at a temperature range from -100C to 3200C. This type of oil has a very strong thermal stability, high specific heat capacity and thermal conductivity, as well as low thermal expansion coefficient, resulting in small pressure increase at temperatures over 3000C.

    Technical data sheet available on request

    Available in packs

    10L
    200L

    Related products

    Products for industrial use

    TRAFOMOL SPECIJAL

    Trafomol Special is an inhibited transformer oil with high dielectric strength, appropriate specific heat capacity and thermal conductivity. It is manufactured from specially refined high-purity base oil and oxidation inhibitor. This type of oil is used for isolation and cooling of various electrical drive equipment, such as transformers, switches, oil cables, etc.
    More

    TRAFOMOL

    Trafomol is a uninhibited insulating oil for transformers, manufactured from specially refined high-purity base oil. It has high dielectric strength, as well as an appropriate specific heat capacity and thermal conductivity. This type of oil is used for isolating and cooling of various electrical drive equipment, such as transformers, switches, dampers, oil cables, etc.
    More

    ULJE ZA OPLATE UP-15

    Formwork release oil is a high-quality oil, containing adhesion-improving additives. It is used as a coating agent for steel, wood and similar formwork (moulds) in concrete manufacturing. Formwork release oil ensures easy detaching of concrete from the formwork, thus leaving the concrete surface smooth.
    More

    ULJE ZA KALUPE ISO VG: 200

    Mould oil is manufactured from solvent base oil and adhesion-improving additives. It is used as a mould lubricant in gas concrete (aerated concrete) and similar product manufacturing. This type of oil has very strong adhesibility properties, thus allowing easy detaching of gas concrete (aerated concrete) from the mould.
    More

    ULJE ZA KALUPE ISO VG: 150

    Mould oil is manufactured from solvent base oil and adhesion-improving additives. It is used as a mould lubricant in gas concrete (aerated concrete) and similar product manufacturing. This type of oil has very strong adhesibility properties, thus allowing easy detaching of gas concrete (aerated concrete) from the mould.
    More
    Copyright © 2024. OPTIMA Grupa